Oyaide MTB-6 DX Power Distributor with SWO-DX Receptacle Outlets

$861.00 What's this?
SKU
OYAMTB-6DX

High-end power for your Audio and Video Systems

Oyaide MTB-6 DX Power Distributor

High Quality Oyaide Power Distribution for Audio / Video and critical applications. Fitted with Oyaide SWO-DX receptacles.

Main Chassis:

The Oyaide MTB-6 DX begins with 2.0mm thick brass plate formed into a special shape for rigidity, speed and good internal energy absorption properties. The plate is coated with extra thick layers of non-electrolytic nickel ground plating, and then finished with chrome plating to further enhance its rigidity and speed characteristics. This also has the effect of improving shielding against wider range E.M.I.

Internal Wiring

The Oyaide MTB-6 also has 2.0mm diameter, high purity (4N) solid Silver, extensively annealed in low temperature to remove mechanical distortion/stress from the extrusion process. We then apply a further highly controlled process in order to produce a smoother and stronger surface for distortion free electron transmission. This also has the effect of eliminating any mechanical weakness caused by the annealing process.

These carefully developed processes enable the Silver to break through to a new level of sound quality. This is further enhanced by independent internal connection to each outlet in order to avoid cross-talk and to ensure evenness. All connections are Lead free.

Further Resonance Control

The main body/insulator is made of Nylon with glass filler mixed in; this ensures high heat resistance, rigidity and a high resonance absorption factor. We also avoided common rubber feet, instead using 4 Brass spikes which can easily be changed to a 3 foot configuration by relocating them.

Electrical Contacts (Receptacle)

Oyaide tested every possible option for this crucial part and concluded that highly polished deoxidized Phosphor Bronze would be optimal as a base material to provide the most secure and least resonant contact. The finishing touches, which determine the final sound quality, are to directly apply an extra thick (1.5 micron) Silver directly to the Bronze substrate, polish the surface twice and finally apply a layer of Rhodium (0.3). This process is strictly controlled for optimum balance and quality of sound. These contacts are supported by 24K Gold plated non-magnetic brass fittings.


Electromagnetic Interference Control

The mains inlet area is protected by an EMI absorbing layer.

Specifications MTB Series
Internal Wiring 2.0mm dia., high purity (4N) solid Silver
AC Outlet SWO-DX (4 outlets) AC Inlet Original IEC AC Intlet (Silver / Rhodium) Plating Dimensions W 70mm x H 50mm x L 270mm Case 2.0mm thick Brass with special plating

Direct Gold (SWO-GX), Gold over Palladium Duplex Receptacles (SWO-XXX)or Beryllium copper receptacles (R-1) are available at additional cost.

More Information
MPN MTB6DX
Write Your Own Review
You're reviewing:Oyaide MTB-6 DX Power Distributor with SWO-DX Receptacle Outlets
We found other products you might like!
© 2022 Revolution Audio & Power. All Rights Reserved.